Estimated arrival: 04/16/2020 (If Ordered Today)
Out of stock at WILWOOD ENGINEERING as of 04/06/2020
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
|Shipping Note:||Standard Delivery|
We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.
No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.
Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.
Wilwood’s newest Dynapro Front Dynamic Drag kits will soon be drag racing’s most popular front brake kits. DPL kits are available for the popular muscle car spindles and struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Dynamic rotor mounting adapters with t-nuts promote less distortion due to temperature and extends rotor life. Forged billet DPL four piston calipers mount directly to the spindle with an aluminum bolt-on brackets. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.
With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.
Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.
Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.
|Download Name||File Size|
|Chevrolet||Nova||1979||KIT,DRAG,FRONT,CAMARO,79-81,DYNAMIC MT,MD,DISC SPINDLE,DRILLED,NICKEL; RTR:10.75-IN DIA, DRILLED STEEL ROTOR, DRILLED; CLPR:DYNAPRO LUG MOUNT, 4-PISTON, NICKEL PLATE
Front kits fit 11" rotor spindles only.
Requires modifications to original spindle
Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Universal Parking Brake cable kit, may require modifications to cable or vehicle to install.
with Disc Brake Spindle
|Part Type||Disc Brake Caliper / Rotor / Pad Kit|
|Kit Components & Specs / Calipers|
|Left Hand - Part No||120-14153-N|
|Right Hand - Part No||120-14153-N|
|Type||Dynapro Lug Mount|
|Finish Color||Nickel Plate|
|Piston 1 Bore (in)||1.75|
|Piston 2 Bore (in)||1.75|
|Piston Area (In²)||4.80|
|Brake Pad Plate||7812|
|Brake Pad Area (In²)||6.36|
|Brake Pad Volume (In³)||2.1|
|Kit Components & Specs / Rotors|
|Left Hand - Part No||160-3306|
|Right Hand - Part No||160-3306|
|Type||Drilled Steel Rotor|
|Surface Finish||Black Oxide|
|Outside Diameter (in)||10.75|
|Parts & Accessories / Caliper Parts|
|Replacement Piston 1||200-7528|
|Replacement Piston 2||200-7528|
|CrossOver O-Ring Kit||130-10540|
|Wear Plate - Left Hand||300-5875|
|Wear Plate - Right Hand||300-5875|
|Bleed Screw Kit||220-0627|
|Bridge Bolt Kit||230-10117|
|OE Hub Offset||+.31|
|(Increase / Decrease Track Width)|
|Spindle Type||Factory Disc Spindle|
|Caliper Type||4 - Nickel Plate|
|Min Wheel Diameter Req'd*||15|
|Kit Components & Specs / Hubs|
|Hub - Part No||270-7310|
|Type||Hub - Solid Rotor Offset|
|Mount Style||Direct / Adapter|
|Bolt Circle 1||5 x 4.50|
|Bolt Circle 2||5 x 4.75|
|Stud Diameter - BC 1||1/2-20|
|Stud Diameter - BC 2||1/2-20|
|Parts & Accessories / *Brake Lines Needed|
|Front Line Kit||220-10509|
Note: HTML is not translated!
Rating: Bad Good